Boombox, field tests
A short addition for this project.. The part where I get to do a quick field test rating for my workmanship!
Whilst attaching the locking clip pictured above, I had to change its position once. This left extra holes in the particle board which in turn weakened it up. No wonder, that once out in the open and hitting a _serious_ bump with the trolley, the board fractured.
Other than this, field test turned out ok. Smooth grooves got played and the lovely sunny afternoon was shared with a bunch of friends. Needless to say, the beer was good too ;)
Reckon I’ll revise the location of the locking clips a little and then proceed with testing.